Table of Contents
Advertisement
f For the connection using the NFC function, use the application software "Smart Projector Control" which performs the setting and
adjustment of the projector.
For details on the "Smart Projector Control", visit the Panasonic website (https://panasonic.net/cns/projector/).
r Control panel
1
Power standby <v> button
Sets the projector to the state where the projector is turned
off (standby mode) when the <MAIN POWER> switch on the
projector is set to <ON> and in projection mode.
2
Power on <b> button
Sets the projector to projection mode when the <MAIN
POWER> switch on the projector is set to <ON> and the power
is turned off (standby mode).
3
Input selection buttons (<HDMI>, <DIGITAL LINK>,
<SLOT 1>, <SLOT 2>)
Switches the input signal to project. (x page 81)
<SLOT 1> button and <SLOT 2> button can be used when the
optional Interface Board is installed in the slot on the projector.
4
Input selection terminal indicator
Indicator that shows the selected input terminal. This indicator
lights up when a video signal is being input to the selected
terminal, and blinks when there is no video signal being input.
5
<INPUT MENU> button
Displays the input selection screen. (x page 83)
6
<LIGHT> switch
This is a light switch for the connecting terminals and control
panel.
34 - ENGLISH
Chapter 1 Preparation — About your projector
1
2
3
4
5
6
7
8
9
10
11
12
13
14
7
Information monitor
Displays various statuses and error information. (x page 263)
8
<INFO> button
Used to operate the information monitor. (x page 263)
9
<MENU> button
Displays or hides the main menu. (x page 100)
Returns to the previous menu when a sub-menu is displayed.
10 <LENS> button
Adjusts the focus, zoom, and lens shift.
11 <ENTER> button
Determines and executes an item in the menu screen.
12 <SHUTTER> button
Used to temporarily turn off the image. (x page 95)
13 asqw buttons
Used to select items in the menu screen, change settings, and
adjust levels.
Also used to enter a password in [SECURITY] or enter
characters.
14 <ON SCREEN> button
Switches the on-screen display function on (display) or off
(hide). (x page 95)
Advertisement
Table of Contents
