MacDon R113 Installation Instructions Manual page 9

Section
3.4.6 Installing Slow Moving Vehicle
Sign, page 39
• Step
5, page 39
3.4.6 Installing Slow Moving Vehicle
Sign, page 39
3.5 Installing Cover, page 40
• Step
1, page 40
5.1 Preparing Rotary Disc Pull-Type for
Transport, page 47
5.1 Preparing Rotary Disc Pull-Type for
Transport, page 47
• Step
1, page 47
5.1 Preparing Rotary Disc Pull-Type for
Transport, page 47
• Step
2, page 47
5.1 Preparing Rotary Disc Pull-Type for
Transport, page 47
• Step
3, page 48
• Step
4, page 48
5.2 Transporting with a Tractor, page
49
5.4 Converting from Field to Transport
Mode – With Road-Friendly
™
Transport , page 51
5.5 Converting from Transport to Field
Mode – With Road-Friendly
™
Transport , page 56
• Step
1, page 56
6.1 Attaching Rotary Disc Pull-Type to
the Tractor, page 61
214633
Summary of Change
Added "washers" to the step and revised associated
picture.
Removed the last two steps of this procedure because
the speed decal was already attached to the bracket.
Revised picture to clarify step.
Changed the following statement to a WARNING:
• To avoid bodily injury or death from unexpected
startup of machine, always stop engine and remove
key from ignition before leaving operator's seat for
any reason.
Added step.
Replaced steps for storing the hitch jack stand with a
reference section at the end of the manual.
Flipped the order of these steps.
Removed step for storing the jack stand because this is
completed in the previous section.
Added DANGER:
• Stop the power take-off (PTO) before converting the
unit into transport mode. The cutting discs continue
to spin after the drive is turned off.
Changed the following WARNING to a CAUTION:
• To prevent equipment damage, ensure cutterbar
doors are properly closed before converting the
machine from field to transport mode.
Added step.
Changed the following WARNING to a CAUTION:
• To prevent equipment damage, ensure cutterbar
doors are properly closed before converting the
machine from field to transport mode.
Added "Attaching Hitch" reference chapters.
vii
Internal Use Only
ECN 57755
Engineering
Tech Pubs
Tech Pubs
Tech Pubs
Tech Pubs
Product Support
Tech Pubs
Tech Pubs
Tech Pubs
Tech Pubs
Revision C