Installing Transport Valve - MacDon R113 Installation Instructions Manual

Check tire pressure daily:
• Maximum pressure is 310 kPa (45 psi) for field wheels (A).
• Maximum pressure is 552 kPa (80 psi) for optional transport
wheels (B).

3.2.4 Installing Transport Valve

NOTE:
Cover support bracket removed from illustrations for clarity.
1. Retrieve valve assembly (A) from the pallet.
2. Position valve assembly (A) on the carrier hitch pin plate
as shown.
3. Install two M20 x 65 bolts (B) (MD #136157), hardened
washers (MD #112130), and nuts (MD #136122).
4. Retrieve two M10 x 20 bolts (MD #136178) from the
shipping bag and install bolts at location (C) with threads
facing up. Install nuts (MD #50101), but do NOT tighten.
5. Torque bolts (B) to 461 Nm (340 lbf·ft).
6. Install support plate (A) (MD #247958) and secure it with
bolts (B).
7. Install bolts (C) (MD #136399), but do NOT tighten.
214633
INSTALLATION INSTRUCTIONS
Figure 3.23: Field and Transport Wheels
C
Figure 3.24: Selector Valve
B
Figure 3.25: Support Plate
21
A
B
A
A
C
A
B
Revision C