MacDon R113 Installation Instructions Manual page 27

11. Install latch assembly (A) onto the carrier frame as shown,
and secure with the M20 bolts, washers, and nuts (B)
retained in Step 10, page
adjustment of the latch assembly may be necessary.
12. Attach hydraulic hose (C) from the latch assembly to tee
fitting (D) as shown.
13. Retrieve clevis pin (A) (MD #120333) and cotter pin (B)
(MD #18648) from the shipping bag and install onto the
hitch bracket at the side of the hitch.
214633
INSTALLATION INSTRUCTIONS
14. Do NOT fully tighten bolts;
C
Figure 3.6: Latch Assembly
Figure 3.7: Latch Pin
15
B B
D
B
A
A
Revision C