MacDon R113 Installation Instructions Manual page 7

Section
3.2.5 Installing Transport Swing
Cylinder, page 22
• Step
6, page 23
3.2.6 Installing Transport Alignment
Control, page 23
3.2.6 Installing Transport Alignment
Control, page 23
• Step
5, page 24
• Step
6, page 25
3.2.6 Installing Transport Alignment
Control, page 23
• Step
9, page 26
3.3.1 Installing Hydraulic Lines and
Hoses, page 27
3.3.1 Installing Hydraulic Lines and
Hoses, page 27
• Step
1, page 27
3.3.1 Installing Hydraulic Lines and
Hoses, page 27
• Step
4, page 27
3.3.1 Installing Hydraulic Lines and
Hoses, page 27
• Step
5, page 27
3.3.1 Installing Hydraulic Lines and
Hoses, page 27
• Step
10, page 28
• Step
11, page 28
3.3.1 Installing Hydraulic Lines and
Hoses, page 27
• Step
12, page 28
3.3.1 Installing Hydraulic Lines and
Hoses, page 27
• Step
13, page 29
• Step
14, page 29
3.3.1 Installing Hydraulic Lines and
Hoses, page 27
214633
Summary of Change
Revised the step to read "rod end" (previously was
"clevis end"). Added part numbers for clarity:
• MD # 281101
• MD #18609
Removed a step regarding the cam assembly shipping
support that was only applicable to the factory-installed
transport option.
Revised steps and NOTE to clarify that the rod end of the
cylinder is being installed.
Corrected part number to MD #247625. Was
MD #247598.
Revised NOTE:
• Refer to the rotary disc pull-type operator's manual
or technical manual for hydraulic fitting installation
details.
Added picture to clarify step.
Added IMPORTANT.
Added part number of fitting for clarity.
• Added part number MD #247781 for clarity.
• Revised steps to correctly identify ports C and D.
Added part number MD #30753 for clarity.
Added part number MD #246366 for clarity.
Added part number MD #30753 for clarity.
v
Internal Use Only
Product Support
Tech Pubs
Tech Pubs
Product Support
Tech Pubs
Tech Pubs
Tech Pubs
Tech Pubs
Tech Pubs
Tech Pubs
Tech Pubs
Tech Pubs
Tech Pubs
Revision C