MacDon R113 Installation Instructions Manual page 40

6. Remove the cap from fitting (A).
7. Remove the plug from hose (B). Install hose to fitting (A)
as shown.
8. Install steel line (A) (MD #246954) from port A on the
completion assembly to tee fitting (D).
9. Install steel line (B) (MD #247335) from port B on the
completion assembly to tee fitting (C).
10. Attach hose (A) (MD #247781) to steel line connecting to
port D of transport swing control.
11. Attach hose (B) (MD #247781) to steel line connecting to
port C of transport swing control.
12. Secure hoses (A) and (B) together with a cable tie
(MD #30753).
NOTE:
Ensure that direction arrow on check valve (C) points
toward tee fitting.
214633
INSTALLATION INSTRUCTIONS
Figure 3.40: Alignment Valve Fitting
Figure 3.41: Completion Assembly Plumbing
Figure 3.42: Transport Swing Cylinder
28
B
A
C
D
A
B
C
A
B
Revision C