11. Retrieve cover assembly (B) from the shipping location.
12. Remove two bolts (A) from cover assembly (B). Retain the
bolts and cover for installation later.
13. Disconnect plugs P102 (A) and P301 (B) from the transport
lighting module.
14. Remove bolts (C) and remove the transport lighting
module, complete with support bracket (D).
15. Discard P-clip (E).
NOTE:
Rotary disc pull-types built prior to model year 2019 are
NOT equipped with P-clip (E).
16. Remove two screws (A) and nuts attaching module (B) to
bracket (C). Retain module (B).
214633
INSTALLATION INSTRUCTIONS
Figure 3.14: Cover Assembly
Figure 3.15: Lighting Module Harness
Figure 3.16: Lighting Module Attached to Bracket
18
A A
B
E
A
B
D
A A
C C
C
B
Revision C