Steering lock-out: Open the valve by turning handle (A) to
the open position (in line with the hose).
Lift cylinder lock-out: Open the valve by turning handle (A)
to the open position (in line with the hose). Repeat on
opposite side.
4. While the light is NOT illuminated, operate the lift control
lever (as if raising the rotary disc pull-type) to fully extend
the lift cylinders and raise the cutterbar off the transport
assembly support. The carrier frame latch will
automatically open.
214633
TRANSPORTING THE ROTARY DISC PULL-TYPE
57
A
Figure 5.19: Steering Lock-Out Valve
Figure 5.20: Lift Cylinder Lock-Out Valve
Figure 5.21: Raising Rotary Disc Pull-Type
A
Revision C