MacDon R113 Installation Instructions Manual page 83

For model year 2020 and later:
CAUTION
Check to be sure all bystanders have cleared the area.
16. Clear bystanders from the area and start the tractor. Do
NOT operate the pull-type.
17. Raise the hitch so that stand (A) is off the ground.
18. Shut down the engine, and remove the key from
the ignition.
19. Remove inner hairpin (B) to release stand (A).
20. Rotate stand (A) upward and into storage position.
21. Insert pin (A) and secure stand (B) in storage position.
214633
REFERENCE
Figure 6.26: Hitch Stand in Working Position
Figure 6.27: Repositioning Hitch Stand
Figure 6.28: Hitch Stand in Storage Position
71
B
A
A
A
B
Revision C