Installing Slow Moving Vehicle Sign - MacDon R113 Installation Instructions Manual

3.4.6 Installing Slow Moving Vehicle Sign

1. Retrieve the slow moving vehicle (SMV) sign that was
previously removed.
2. Remove bolts (A), and discard existing bracket (B). Retain
the two bolts, nuts, and washers.
NOTE:
For model year 2019 and prior: Pull-types are NOT
equipped with washers. Order two washers (MD #18670)
separately.
3. Retrieve bracket (A) (MD #259218).
4. Attach bracket (A) to left end float spring member with
M12 bolts (B) (MD #184667) and nuts (MD #136431)
retrieved from the shipping bag.
5. Attach sign (C) to bracket (A) and secure with two bolts (D),
washers (E), and nuts (F).
214633
INSTALLATION INSTRUCTIONS
Figure 3.67: SMV Sign
Figure 3.68: SMV Sign
39
B
F F
E E
C
A
B
A
D
Revision C