MacDon R113 Installation Instructions Manual page 82

For model year 2019 and prior:
CAUTION
Check to be sure all bystanders have cleared the area.
10. Clear bystanders from the area and start tractor. Do NOT
operate the rotary disc pull-type.
11. Start the tractor and raise the hitch so that stand (A) is off
the ground.
12. Shut down the engine, and remove the key from
the ignition.
13. Remove inner hairpin (B) and pull lock (C) to release
stand (A).
14. Raise stand (A), rotate lock (B) clockwise to vertical
position, and re-engage lock (B) to hold the stand in the
storage location.
15. Secure lock with lynch pin (A).
214633
REFERENCE
Figure 6.23: Hitch Stand
Figure 6.24: Hitch Stand
Figure 6.25: Hitch Stand
70
B
A
A
B
A
C
Revision C