Table of Contents
Advertisement
Selecting and Installing a BJ Cartridge
Canon offers a number of Bubble Jet (BJ) cartridges to meet a wide
range of printing requirements. (The MultiPASS C20 comes with one
BC-21/21e Colour BJ cartridge.) This section describes how to select the
best BJ cartridge for your needs, as well as how to install and maintain
the cartridge.
Guidelines for Using and Maintaining BJ Cartridges
The most important thing you can do to ensure the best possible print
quality, as well as extend the life of your MultiPASS C20, is to take care
of the MultiPASS C20's BJ cartridges following these guidelines:
Store cartridges at room temperature.
Keep cartridges in their sealed containers until you are ready to use
them.
Install the cartridge immediately after removing its print head cap
and protective tape.
Always use the cartridge within one year of unpacking it.
When changing cartridges, always store the unused cartridge in the
SB-21 BJ cartridge container that comes with the MultiPASS C20.
Do not remove the cartridge from the MultiPASS C20 unless
necessary.
N
The ink in the BJ cartridges is difficult to clean up if spilled. To avoid
spilling ink, always be sure to follow these precautions when handling
the cartridges:
Do not attempt to disassemble or refill the cartridge.
Do not shake or drop the cartridge, or tip the print head downward.
Keep BJ cartridges out of children's reach.
Chapter 2
Setting Up Your MultiPASS C20
2-25
Advertisement
Table of Contents
