Installing the BJ Cartridge
Make sure the MultiPASS C5500 is plugged in.
1
Open the
Grasp both sides of the cover and lift up.
printer cover.
The LCD reads:
When you plug in the MultiPASS C5500 for the first time the cartridge holder
moves to the center of the unit so you can install the BJ cartridge.
If the cartridge holder is not in the center, press the
on the operator panel.
Do not move the cartridge holder manually; this may damage the unit.
Do not touch the ribbon cable, the small circuit board, the guide rail, or the
Caution
round shaft.
GUIDE RAIL
RIBBON CABLE
10
CARTRIDGE
CANON MPC-5500/QSG, Page 10 - File: 55-QSP10.eps
W. Swanlund
button
CIRCUIT BOARD
ROUND SHAFT
CARTRIDGE
BUTTON
UPDATE3> August 14 '98