Installing The Bj Cartridge; Bj Cartridge Guidelines - Canon MultiPASS C70 User Manual

Installing the BJ Cartridge

This section explains how to install the BJ cartridge in the MultiPASS
C70 so that you can begin using your unit. For more details on BJ
cartridges and BJ tanks, refer to BJ Cartridge on page 12-12.
n
The MultiPASS C70 comes with one BX-20 Black BJ cartridge and one
BC-21e Colour BJ cartridge. The BC-22e Photo BJ cartridge is available
as an option for the MultiPASS C70. For details on purchasing any of
these cartridges, contact your local authorised Canon dealer.*

BJ Cartridge Guidelines

The most important thing you can do to ensure the best possible print
quality, as well as extend the life of your MultiPASS C70, is to take care
of the MultiPASS C70's BJ cartridges following these guidelines:
Store BJ cartridges at room temperature.
Keep BJ cartridges in their sealed containers until you are ready to
use them.
Do not shake BJ cartridges vigorously while handling.
To change a BJ cartridge, be sure to press the C button (inside the
unit) to move the cartridge holder to the centre.
Install the BJ cartridge immediately after removing its print head
cap and protective tape.
Always use the BJ cartridge within one year of unpacking it.
When changing BJ cartridges, always store the unused BJ cartridge
in the SB-21 BJ cartridge container provided with the MultiPASS
C70.
Do not remove the BJ cartridge from the MultiPASS C70 unless
necessary.
* The BJ cartridges included with your MultiPASS C70 may vary depending on
the country of purchase.
Chapter 2 Setting Up Your MultiPASS C70
2-29