Table of Contents
Advertisement
Installation Manual – RPSP
4.4.2 Radio receiver (RFPcb)
LED D19
LED D14
LED D12
Main characteristics:
Frequency 433 Mhz
Two transmission channels for ascent and descent
Two transmission channels for platform opening and closing (only with mobile remote)
Possibility of configuring selector S1 with 4 different recognition codes to prevent anomalies with
nearby systems.
The position of selector S1 dips must be the same both on the receiver
45
nd on the wall call box. Below is a table of LED functions
) a
D16+D17(CONF. WITH 2 OPEN FLAPS ON THE LOW FLOOR)
D16(CONF. WITH 1 OPEN FLAPS ON THE LOW FLOOR)
D17(CONF. WITH 1 OPEN FLAPS ON THE LOW FLOOR)
The radio receiver jumper determines the direction of
machine installation (left/right).
To configure the machine in 'right' mode, remove the
jumper.
To configure the machine in 'left' mode, insert the jumper.
LED D18
LED D10
LED D11
LED
D13
D13+D10
D13+D12
D13+D11
D14
D15
D18
Table 2 – Radio receiver LEDs
Fig. 44 – Radio receiver detail (jumper)
Jumper
Selector S1
LED D13
Fig. 43 – RFPcb
35
LED D17
LED D16
LED D15
Fig. 43
on the transmitter
(
),
FUNZIONE
UP RUN
DOWN RUN
PLATFORM CLOSE
PLATFORM OPEN
TX DISTANCE CALIBRATION IN
PROGRESS
POWER
STAIR LIFT ON FLOOR
STAIR LIFT ON LOW FLOOR
STAIR LIFT ON HIGH FLOOR
PLATFORM CLOSED
Rh
INS-RPSP-EN-05
Fig.
(
Lh
Advertisement
Table of Contents
