Wiring Inside The Inclined Platform Lift; Mainboard - Access RPSP Installation Manual

Installation Manual – RPSP

4.4 Wiring inside the Inclined Platform Lift

4.4.1 Mainboard

X7A
X7
S5
KL
LED
S4
X4
X6
Mainboard D-199 manages all lift automatisms. The machine can be right or left depending on the type of
installation. Board connections vary based on the type of installation, as described below.
Right or Left Machine (X2L and X2R connectors)
These connectors, positioned on the mainboard, allow you to configure the machine's safety devices
according to the type of installation.
During installation (if not already configured in the factory), you will need to insert the male connector X", as
shown in the figure.
(Left Side Installation)
S2
KR K KA2 KP2
J1
X3 X2L
Fig. 40 – Mainboard
X2 X2L
Fig. 41 – X2L and X2R connectors
Buzzer
KP1 KA1 KR1 KS1
X2R
X2B
(Right Side Installation)
33
INS-RPSP-EN-05
DC/DC Vin = 30V DC switching
converter (not adjusted) Volts
= 24Vdc
KR2 KS2
X1
X8 X9
X2 X2R
X15
X10
X14
X13
X12
X11