Drive Unit Adjustment - Access RPSP Installation Manual

Installation Manual – RPSP

4.2.2 Drive Unit adjustment

Attention! If the machine is equipped with a side mobile slide, this device can be removed to make
Traction Unit uncoupling from the Frame easier. See chapter 5.8
Attention! Be careful of all platform movements whenever working with a manual platform as it
could close suddenly.
Attention! Do not use excessive force on motorised platforms when moving them as not to damage
the automatic platform opening device.
 After
completing
operations, the frame needs to be placed upright
(making use of the mounting support).
 Open the platform slowly, avoiding any sudden
movements that could damage the motorized tilt
device clutch.
 Unscrew the M6 screws attaching the casing to
the frame (see highlighted points in Figure).
eventual customisation
Fig. 27 - Disconnecting the Drive Unit from the frame
Fig. 28
27
INS-RPSP-EN-05