Installation Manual – RPSP
3 Preliminary Activities
3.1 List of equipment and consumables needed
Shown below is a list of equipment recommended for installing the inclined platform lift and its track..
Open-closed wrenches:
o 1 size 8 wrench
o 2 size 10 wrenches
o 2 size 13 wrenches
o 1 size 17 wrench
o 1 size 19 wrench
o 1 size 20 wrench
o 1 size 21 wrench
o 2 size 24 wrenches
Socket wrench size 10, 13
Flat screwdriver
o 0,5 x 3 x 75
o 0,8 x 4 x 125
Phillips head screwdriver
o PH1 x 80
o PH2 x 100
o PH3 x 200
Pliers
Hammer
Plastic mallet
Knife
Tape measure
Silicone gun
Multi meter
Felt tip pen
Normal level
Bubble protractor
Flat iron file 5 x 10 x 150
Hammer drill
Concrete drill bits, diameter 6 -12-14
Metal drill bits, diameter 2,5 - 4 - 6 - 6,5 - 6,75 - 8 - 8,5 - 10
Allen wrench, diameter 4 - 5 - 6 - 8
Taps and die for threading (male) M4 - M8
Countersink bit
Soft brush
Cloth
Can of cutting oil
Sabre saw with blade for cutting plastic
Reversible ratcheting wrench
14
INS-RPSP-EN-05
socket wrench and jack
"T" articulated wrench