General Information; Requirements; Delivery Package - Access RPSP Installation Manual

Installation Manual – RPSP
1

General Information

1.1 Requirements

Before using the machine, carefully read and understand ALL the instructions given in this manual. Failure to
comply with these instructions may lead to danger or unsatisfactory function.
The manufacture will not be held liable for any problems, breakages or incidents due to failure to comply or
apply the instructions given in this manual.
In this case, all warranty conditions shall also be forfeited.
The operations specified in the manual must be carried out by competent, appropriately trained staff.
Suitable equipment and personal protection equipment in compliance with current health and safety
regulations must be used. All applicable standards and codes of practice, must be applied.
It is strictly prohibited to alter and/or tamper with the machine in any way.
This document must be kept in a safe place for the entire duration of the machine's working life.
INSTRUCTIONS: what is meant with the word "instructions" is that all of the information provided by the
manufacturer for the safe use of the machine as pursuant to the Machine Directive 2006/42/EC, including
those for the masonry work, for installation, use and correct maintenance and not excluding the warnings to
avoid improper utilisation.
ORIGINAL TEXT This user manual in the Italian language is the ORIGINAL VERSION to which every translated
version must make reference.

1.2 Delivery Package

Machine Box [1450x1600 mm]
 Frame and platform mounted on self-standing support
 Motor truck positioned on frame
 Cable holder chain
 Left and right revolving wheel unit
 Chain bracket
 Cams (2 pieces)
 Handle bar

Upper and lower guide plugs

Frame crush-proofing
 Upper casing
 Front casing
 Rear casing
 Motor casing in two pieces
 Nuts, bolts and accessories
Guide box/es
The contents of the box/es vary according to the length of the guide and consequently the number of track
rails. Each track rail is supplied with:

Main rail

Rail casing in two pieces
 Nuts, bolts and accessories
3
INS-RPSP-EN-05