Access RPSP Installation Manual page 30

Installation Manual – RPSP
Caution! Use the special handle to help supporting the object.
 Take the Drive Unit (on the ground) and insert
it slowly onto the high end of the guide; move
motor unit-rear casing structure until the motor
pinion is locked on the rack.
 Cut the adhesive tape holding the chain and
extend it downwards. The guide has 2 holes
about halfway along. Use them for fixing the
bracket.
 Insert the moveable part of the guide into the
lower length of the guide (use the 1.1 m piece).
Fig. 32 – Drive Unit inserted at the end of the guide
Fig. 33 – Chain fixing on the guide (detail)
29
INS-RPSP-EN-05