FOR-A FA-9600 Operation Manual page 7

Trademarks
Microsoft, Windows and Edge are registered trademarks or trademarks of Microsoft Corporation
in the United States and/or other countries.
Intel and Intel Core are trademarks or registered trademarks of Intel Corporation.
Apple, macOS and Safari are trademarks or registered trademarks of Apple Inc.
HDMI is a trademark or registered trademark of HDMI Licensing LLC.
Google and Chrome are trademarks or registered trademarks of Google Inc.
Mozilla and Firefox are trademarks or registered trademarks of the Mozilla Foundation.
Dolby is a trademark of Dolby Laboratories Inc.
Dante is a trademark or registered trademark of Audinate Pty Ltd.
* All other trademarks are trademarks or registered trademarks of their respective owners.
AC Cord Clamp Installation
1) Insert the anchor into the hole next to the AC inlet.
2) Plug in the AC cord.
3) Adjust the strap length to fit.
4) Wrap the AC cord clamp around the AC cord.
5) Gently pull on the AC cord to ensure it has been securely plugged in.
1)
2)
Installing the HDMI Cable Lacing Bracket
Secure the HDMI cable to the panel with the supplied cable lacing bracket.
1) Plug the HDMI cable into the HDMI connector on the rear panel.
2) Loosen (but do not remove) the screw above the connector.
3) Place the bracket on the screw, above the connector.
Tighten the screw (but not too tight) to secure the bracket.
4) Use the supplied tie wrap to secure the bracket to the connector.
5) Tighten the tie wrap and cut off any excess.
2)
3)
1)
7
3)
4)
4)
5)