Global Settings; Table 27: Overview Of Parameters For The Entire Module - WAGO -SPEEDWAY 767 Manual

56 Parameterizing
Pos : 30.19 /Serie 767 ( WAGO-SPEED WAY)/Parametrier en/I/O-Module/Parametrier ung 767- xxxx Gl obal e Parameter @ 7\mod_1265881925390_21.doc x @ 50320 @ 2 @ 1
7.4

Global Settings

Table 27: Overview of parameters for the entire module

Parameter
Simulation diagnostic
Low voltage U
Low voltage U
Pos : 30.20 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Description
If the checkbox is selected, you can simulate a low voltage diagnostic.
To generate a low voltage diagnostic, one or both of the two checkboxes
"Low voltage U
Default setting: unselected
LS
In the case of an undervoltage of the logic and sensor supply (U
the actuator supply (U
A
767-4804/000-800 8DO 24V DC 2.0A IF (4xM12)
" and "Low voltage U
LS A
), the corresponding diagnostic is displayed here.
A
WAGO-SPEEDWAY 767
" must be selected.
LS
Manual
Version 1.1.0
) or