Mounting the rigid arm
Prerequisite: Before mounting the rigid breathing
bag holder, the bag elbow on the compact
breathing system must be removed.
C
1 Position and align the connection adapter (A)
of the rigid arm on the connection of the
compact breathing system.
2 Tighten the knurled screws (B). Check that the
arm is fixed securely.
3 Fasten the breathing bag (C) at the other end
of the rigid arm.
Instructions for use Fabius plus SW 3.n
Mounting the bag elbow
A
B
1 Attach the bag elbow (A) on the connection of
2 Attach the breathing bag (B) on the connector
Assembly and preparation
the compact breathing system.
of the bag elbow.
A
B
69