Alarm - Cause - Remedy - Dräger Fabius plus Instructions For Use Manual

Troubleshooting
Alarm – Cause – Remedy
Alarm messages are displayed in hierarchical form
in the alarm message field of the main screen, see
chapter ''Screen display'' on page 44.
The priority of the alarm messages is marked by
exclamation points.
The alarm messages are only displayed on
colored background if the option "Color display" is
activated.
Warning !!!
Caution !!
Note !
Within an alarm priority, the alarm messages are
assigned internal priorities. In the following table,
these internal priorities are indicated as numbers.
The alarm message with the highest priority has
the number 31. The lower the priority, the lower the
number.
The table shows possible causes for an alarm and
corresponding remedies. Causes and remedies
must be worked through in the order listed until the
alarm has been resolved. The alarm messages are
listed in alphabetical order.
Some alarms appear in this table several times
with different alarm priorities because their priority
can change under certain conditions.
160
Red
Yellow
White
Instructions for use Fabius plus SW 3.n