Scanner Operation; Configuration Mode Options; Scan Buffers - Honeywell MetroSelect Eclipse MS 5145 Configuration Manual

7

Scanner Operation

Configuration Mode Options

³ 1 1 8
³ 1 1 8
³ 1 1 8
³ 1 1 8

Scan Buffers

³ 3 1 8
³ 3 1 8
³ 3 1 8
³ 3 1 8
Allow Configuration Mode on Power Up – The
scanner can only enter MetroSet mode before
1 1 7
any bar codes are scanned.
* Allow Configuration Mode Anytime – Allow
MetroSet configuration at any time.
1 0 7
Allow configuration Codes on Power Up –
Once a product bar code is scanned after power-
1 1 6
up, the scanner will not accept configuration bar
codes.
* Allow Configuration Codes Anytime – Allows
scanning of configuration bar codes at any time.
1 0 6
* 1 Scan Buffer – The scanner will scan one bar
code in the scan field and not scan again until
0 0 0
the bar code is removed from the scan field for
the duration of the same symbol time out.
2 Scan Buffers – The scanner will scan two bar
codes in the scan field one time each. These two
0 1 0
bar codes will not be scanned again and until
they are removed from the scan field for the
duration of the same symbol time out.
3 Scan Buffers – Same function as 2 Scan
Buffers, but three bar codes are in the scan field.
0 2 0
4 Scan Buffers – Same function as 2 Scan
Buffers, but four bar codes are in the scan field.
0 3 0
7–1