Boot Options Submenu - Fujitsu PRIMERGY TX200 S2 User Manual

Chapter 8 Configuring Hardware and Utilities

8.2.4 Boot Options Submenu

Sets system startup options.
Main Advanced
POST Errors:
Keyboard Check:
SM Error Halt:
Fast Boot:
Quiet Boot:
NumLock
Boot Menu:
MultiBoot for HDs:
> Boot sequence:
Help
F1
Exit
Esc
Item
POST Errors
Keyboard Check
SM Error Halt
Fast Boot
Quiet Boot
NumLock
Boot Menu
MultiBoot for HDs
236
PhoenixBIOS Setup Utility
Security Server
Boot Options
[Halt On All Errors]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[Auto]
[Enabled]
[Disabled]
-/+ Change Values
Select Item
Select Menu Enter Select > Sub-Menu
table: Items on the Boot Options Submenu
Setting
Halt On All Errors (Fixed
parameter)
• Disabled
• Enabled (at the time of
purchase)
Disabled (Fixed
parameter)
Disabled (Fixed
parameter)
Disabled (Fixed
parameter)
Auto (Fixed parameter)
Enabled (Fixed
parameter)
• Disabled (at the time
of purchase)
• Enabled
Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
Description
Sets whether or not to stop the boot process and shut down
the system, in case a POST (Power On Self Test) error is
detected.
Sets whether or not to check keyboard connection during
POST.
Sets the procedure in case an error occurs regarding the fan
or temperature sensor.
Sets whether or not to reduce the scope of POST and thereby
speed up system startup.
Sets whether or not to display the logo screen instead of
POST information.
The state of the NumLock during activation.
Sets whether or not to display the boot drive selection
window after POST.
By selecting the boot drive from the [Boot Menu] window,
startup can be done from the selected boot drive regardless of
the [Boot Sequence] setting.
Sets whether or not it is possible to specify the order of hard
disks to boot the operating system (OS) when multiple hard
disk units are installed.
To perform a PXE boot, set to [Enabled].