Command List; List By Function - Agilent Technologies E5052A Programmer's Manual

Command list

List by function

Bellow table shows the SCPI command list by function.
Function
24Bit I/O control Outputs data using port A
Outputs data using port B
Inputs/Outputs data using port C
Selects input/output mode on port C
Inputs/Outputs data using port D
Selects input/output mode on port D
Inputs/outputs data using port E(port C + port D; 16
bits)
Inputs/outputs data using port F(port A + port C; 16
bits)
Sets/Reads OUTPUT1 and/or OUTPUT2
Auto Frequency Turns on/off the auto frequency control function
Control
Executes the auto frequency control once.
Sets/Reads the frequency band in the auto frequency
control function
Sets/Reads the maximum number of iterations for the
DC control voltage-setting loops
Sets/Reads the maximum DC control voltage limit
Sets/Reads the minimum DC control voltage limit
Sets/Reads the maximum input level of the
downconverter in order to determine the IF Gain
Sets/Reads the tuning sensitivity
Sets/Reads the target frequency in the auto frequency
control function
Sets/Reads the tolerance limit
Beeper Makes beep sound for operation completion
Turns on/off the beep for operation completion
Makes beep sound for warning
Turns on/off the beep for warning
7
Setting/Execution item
SCPI Command Reference
Command
:CONT:HAND:A[:DATA]
:CONT:HAND:B[:DATA]
:CONT:HAND:C[:DATA]
:CONT:HAND:C:MODE
:CONT:HAND:D[:DATA]
:CONT:HAND:D:MODE
:CONT:HAND:E[:DATA]
:CONT:HAND:F[:DATA]
:CONT:HAND:OUTP[1-2][:DATA]
:SOUR:VOLT:CONT:AFC[:STAT]
:SOUR:VOLT:CONT:AFC:IMM
:SOUR:VOLT:CONT:AFC:FBAN
:SOUR:VOLT:CONT:AFC:ITER
:SOUR:VOLT:CONT:AFC:LIM:HIGH
:SOUR:VOLT:CONT:AFC:LIM:LOW
:SOUR:VOLT:CONT:AFC:INP:LEV:MAX
:SOUR:VOLT:CONT:AFC:SENS
:SOUR:VOLT:CONT:AFC:TARG
:SOUR:VOLT:CONT:AFC:TOL
:SYST:BEEP:COMP:IMM
:SYST:BEEP:COMP:STAT
:SYST:BEEP:WARN:IMM
:SYST:BEEP:WARN:STAT
List by function
377