Agilent Technologies E5052A Programmer's Manual page 437

Key Operation
Saves memory trace data
Save Memory Trace
Save State
Saves settings
Autorec
File Dialog... Opens file dialog
Selects instrument state type (Entire or instrument state only)
Save Type
Saves state file to register 1
State01
State02 Saves state file to register 2
Saves state file to register 3
State03
Saves state file to register 4
State04
Saves state file to register 5
State05
State06 Saves state file to register 6
Scale
Executes autoscale
Auto Scale
Sets/Reads Y-scale divisions
Divisions
Marker -> Reference Sets the marker value to the reference level
Sets/Reads the reference position
Reference Position
Sets/Reads the reference level value
Reference Value
Scale/Div Sets/Reads scale per division
Setup
Sets/Reads the reference level of frequency span
Reference Level
Start/Center
Carrier To
Changes the center frequency to the carrier frequency.
Carrier -> Center
Changes the center frequency to 2 times the carrier frequency.
Carrier x 2 ->
Center
Carrier x 3 -> Changes the center frequency to 3 times the carrier frequency.
Center
Changes the center frequency to # times the carrier frequency. (The # is
Carrier x # ->
assigned by
Center
Sets/Reads the carrier frequency band.
Frequency Band
7
Function
key.)
Harmonic #
SCPI Command Reference
Softkey Functions
Table 7-4 SP Menu
SCPI Command
:MMEM:SP[1-1]:TRAC[1-1]:ST
OR:MEM
:MMEM:STOR:STAT
:MMEM:STOR:STYP
:MMEM:STOR:STAT
:MMEM:STOR:STAT
:MMEM:STOR:STAT
:MMEM:STOR:STAT
:MMEM:STOR:STAT
:MMEM:STOR:STAT
:DISP:SP[1-1]:TRAC[1-1]:Y[:SC
AL]:AUTO
:DISP:SP[1-1]:Y[:SCAL]:DIV
:DISP:SP[1-1]:TRAC[1-1]:Y[:SC
AL]:RLEV
:DISP:SP[1-1]:TRAC[1-1]:Y[:SC
AL]:RPOS
:DISP:SP[1-1]:TRAC[1-1]:Y[:SC
AL]:RLEV
:DISP:SP[1-1]:TRAC[1-1]:Y[:SC
AL]:PDIV
:SENS:SP[1-1]:POW:RLEV
:SENS:SP[1-1]:CARR:SET:CEN
T 1
:SENS:SP[1-1]:CARR:SET:CEN
T 2
:SENS:SP[1-1]:CARR:SET:CEN
T 3
:SENS:SP[1-1]:CARR:SET:CEN
T #
:SENSe:SP[1-1]:CARRier:FBAN
d
437