Agilent Technologies E5052A Programmer's Manual page 385

Function
Phase noise Reads out the limit test result
measurement - Limit
Turns on/off the limit test function
Test
Sets/Reads the number of segments in the upper limit
line
Sets/Reads the number of segments in the lower limit
line
Sets/Reads segment data of the upper limit line
Sets/Reads segment data of the lower limit line
Clears the upper limit line
Clears the lower limit line
Sets/Reads the upper limit values of all measurement
points
Sets/Reads the lower limit values of all measurement
points
Reads out the limit test result
Reads the limit test results of all measurement points
in selected traces
Turns on/off the limit line
Turns on/off the limit test judgement display
Reads the upper limit line
Reads the lower limit line
Phase noise Turns on/off marker coupling function
measurement -
Sets/Reads marker movement (Continuous/Discrete)
Marker/analysis
Sets/Reads marker reference number
Turns on/off delta marker mode
Selects active marker
Sets/Reads marker search range (X-axis)
Sets/Reads marker search range (Y-axis)
Executes marker search all
Sets/Reads the center value of bandmarker X
Sets/Reads the span value of bandmarker X
Sets/Reads the start value of bandmarker X
Turns on/off bandmarker X
Sets/Reads the stop value of bandmarker X
Sets/Reads the center value of bandmarker Y
Sets/Reads the span value of bandmarker Y
7
Setting/Execution item
SCPI Command Reference
Command
:CALC:PN[1-1]:ALLT:LIM:FAIL
:CALC:PN[1-1]:TRAC[1-1]:LIM[:STAT]
:CALC:PN[1-1]:TRAC[1-1]:LIM:UPP:SEGM:COUN
:CALC:PN[1-1]:TRAC[1-1]:LIM:LOW:SEGM:COUN
:CALC:PN[1-1]:TRAC[1-1]:LIM:UPP:SEGM:DATA
:CALC:PN[1-1]:TRAC[1-1]:LIM:LOW:SEGM:DATA
:CALC:PN[1-1]:TRAC[1-1]:LIM:UPP:SEGM:CLE
:CALC:PN[1-1]:TRAC[1-1]:LIM:LOW:SEGM:CLE
:CALC:PN[1-1]:TRAC[1-1]:LIM:UPP:LDAT
:CALC:PN[1-1]:TRAC[1-1]:LIM:LOW:LDAT
:CALC:PN[1-1]:TRAC[1-1]:LIM:FAIL
:CALC:PN[1-1]:TRAC[1-1]:LIM:REP[:DATA]
:DISP:PN[1-1]:TRAC[1-1]:LIM:LINE
:DISP:PN[1-1]:LIM:FSIG
:MMEM:PN[1-1]:TRAC[1-1]:LOAD:LIM:UPP
:MMEM:PN[1-1]:TRAC[1-1]:LOAD:LIM:LOW
:CALC:PN[1-1]:ALLT:MARK:COUP:STAT
:CALC:PN[1-1]:ALLT:MARK:DISC:STAT
:CALC:PN[1-1]:ALLT:MARK:REF:NUMB
:CALC:PN[1-1]:ALLT:MARK:REF:STAT
:CALC:PN[1-1]:TRAC[1-1]:ALLM:ACT
:CALC:PN[1-1]:TRAC[1-1]:ALLM:SEAR:DOM:X
:CALC:PN[1-1]:TRAC[1-1]:ALLM:SEAR:DOM:Y
:CALC:PN[1-1]:TRAC[1-1]:ALLM:SEAR:PEAK
:CALC:PN[1-1]:TRAC[1-1]:BDM:X:CENT
:CALC:PN[1-1]:TRAC[1-1]:BDM:X:SPAN
:CALC:PN[1-1]:TRAC[1-1]:BDM:X:STAR
:CALC:PN[1-1]:TRAC[1-1]:BDM:X:STAT
:CALC:PN[1-1]:TRAC[1-1]:BDM:X:STOP
:CALC:PN[1-1]:TRAC[1-1]:BDM:Y:CENT
:CALC:PN[1-1]:TRAC[1-1]:BDM:Y:SPAN
List by function
385