System:beeper:warning:state; System:date - Agilent Technologies E5052A Programmer's Manual

USER Menu -> System -> Misc Setup -> Beeper -> Test Beep Warning

:SYSTem:BEEPer:WARNing:STATe

Syntax
:SYSTem:BEEPer:WARNing:STATe {ON|OFF|1|0}
:SYSTem:BEEPer:WARNing:STATe?
Description
Turns on/off the beep for warning
Parameter
ON or 1
OFF or 0(Preset
value)
Equivalent key
PN Menu -> System -> Misc Setup -> Beeper -> Beep Warning
SP Menu -> System -> Misc Setup -> Beeper -> Beep Warning
FP Menu -> System -> Misc Setup -> Beeper -> Beep Warning
TR Menu -> System -> Misc Setup -> Beeper -> Beep Warning
USER Menu -> System -> Misc Setup -> Beeper -> Beep Warning

:SYSTem:DATE

Syntax :SYSTem:DATE <numeric 1>,<numeric 2>,<numeric 3>
:SYSTem:DATE?
Description Sets/Gets system date
Parameter
Range
Preset value
Unit
Resolution
Range
Preset value
7
:SYSTem:BEEPer:WARNing:STATe
Description
Set the beep for warning mode to 'ON'
Set the beep for warning mode to 'OFF'
<Numeric 1>
1980 to 2030
-
-
-
<Numeric 2>
1 to 12
-
SCPI Command Reference
367