Agilent Technologies E5052A Programmer's Manual page 3

Typeface Conventions
Bold
Italic
[Key]
[Key]
Documentation Map
The following manuals are available for the Agilent E5052A.
•
•
•
NOTE
The number position shown by "x" in the part numbers above indicates the edition number.
-
Item
User's Guide (Part Number E5052-900x0, attached to Option ABA)
This manual describes most of the basic information needed to use the E5052A. It
provides a function overview, detailed operation procedure for each function (from
preparation for measurement to analysis of measurement results), specifications, and
supplemental information. For programming guidance on performing automatic
measurement with the E5052A, please see the Programming Manual.
Programmer's Guide (Part Number E5052-900x1, attached to Option ABA)
This manual provides programming information for performing automatic
measurement with the E5052A. It includes an outline of remote control, procedures for
detecting measurement start (trigger) and end (sweep end), application programming
examples, a command reference, and related information.
VBA Programmer's Guide (Part Number E5052-900x2, attached to Option ABA)
This manual describes programming information for performing automatic
measurement with internal controller. It includes an outline of VBA programming,
some sample programming examples, a COM object reference, and related
information.
Boldface type is used when a term is defined. For
example: icons are symbols.
Italic type is used for emphasis and for titles of
manuals and other publications.
Indicates the hardkey whose key label is Key.
Indicates a series of key operations in which you
press the key, select (highlight) the item
[Key]
called Item on the displayed menu using the
key and so on, and then press the
[↓]
[Enter] key.
3