Sense:sp[1-1]:Frequency:stop - Agilent Technologies E5052A Programmer's Manual

SCPI Command Reference

:SENSe:SP[1-1]:FREQuency:STOP

When the downconverter is turne on and the RF input is set to 'Downconverter'
Equivalent key SP Menu -> Start/Center -> Start
SP Menu -> Stop/Span -> Start
SP Menu -> Marker To -> Marker -> Start
:SENSe:SP[1-1]:FREQuency:STOP
Syntax
:SENSe:SP[1-1]:FREQuency:STOP <numeric>
:SENSe:SP[1-1]:FREQuency:STOP?
Description Sets/Reads the stop value of frequency span
Parameter
When the E5052A is used stand-alone, or with the downconverter turned off
(Allowable setting range varies depending on whether the frequency offset is on or
off, the LO frequency within the frequency offset, and the conversion mode used in
the frequency offset)
When the downconverter is turne on and the RF input is set to 'E5052A Direct'
(Allowable setting range varies depending on whether the frequency offset is on or
off, the LO frequency within the frequency offset, and the conversion mode used in
the frequency offset)
318
<Description>
Range 2.9925G to 26.49999995G
Preset value 2.9925M
Unit Hz
Resolution 100m
<Numeric>
Range 10.00005M to 117.0075G
Preset value 1.0075G
Unit Hz
Resolution 100m
<Description>
Range 10.00005M to 113.0075G
Preset value 3.0075G
Unit Hz
Resolution 100m
7