Agilent Technologies E5052A Programmer's Manual page 35

change the settings as necessary. For details, refer to the manual of the Agilent I/O
Libraries.
Step 4. In the IO Config setting screen, check that the LAN Client has been added and then click
the OK
Control using C or Visual Basic
You can control the E5052A by programming using SICL with the C language in the
UNIX environment, or Visual C++ or Visual Basic in the Windows environment.
Control using Agilent VEE
Agilent VEE allows you to control the E5052A via the I/O interface. The following
example shows how to control the E5052A when it is set as follows: the address of the
SICL-LAN server is 17 and the IP address is 1.10.100.50.
NOTE
When using Agilent VEE for PC, use Agilent VEE Pro 6 for Windows or later.
Step 1. On the Agilent EVE's
2
button.
I/O menu, click
Overview of Remote Control
LAN Remote Control System
Instrument Manager... .
35