Agilent Technologies E5052A Programmer's Manual page 438

SCPI Command Reference
Softkey Functions
Key Operation
Sets the magnification of carrier frequency when center frequency is set.
Harmonic #
Sets/Reads the center value of frequency span
Center
Sets/Reads the span value of frequency span
Span
Sets/Reads the start value of frequency span
Start
Sets/Reads the stop value of frequency span
Stop
Stop/Span
Carrier To
Changes the center frequency to the carrier frequency.
Carrier -> Center
Changes the center frequency to 2 times the carrier frequency.
Carrier x 2 ->
Center
Changes the center frequency to 3 times the carrier frequency.
Carrier x 3 ->
Center
Carrier x # -> Changes the center frequency to # times the carrier frequency. (The # is
assigned by
Center
Sets/Reads the carrier frequency band.
Frequency Band
Sets the magnification of carrier frequency when center frequency is set.
Harmonic #
Sets/Reads the center value of frequency span
Center
Span Sets/Reads the span value of frequency span
Sets/Reads the start value of frequency span
Start
Sets/Reads the stop value of frequency span
Stop
System
Aborts printing
Abort Printing
Turns on/off backlight
Backlight
Saves screen image
Dump Screen Image
Instrument Setup
Correction
Loads correction data for a specified power
File Dialog ...
Loads correction data for a specified power
Import Power
Correction
Table
Sets user the user calibration on or off or reads its setting
Power
Correction
438
Function
key.)
Harmonic #
Table 7-4 SP Menu
SCPI Command
:SENS:SP[1-1]:FREQ:CENT
:SENS:SP[1-1]:FREQ:SPAN
:SENS:SP[1-1]:FREQ:STAR
:SENS:SP[1-1]:FREQ:STOP
:SENS:SP[1-1]:CARR:SET:CEN
T 1
:SENS:SP[1-1]:CARR:SET:CEN
T 2
:SENS:SP[1-1]:CARR:SET:CEN
T 3
:SENS:SP[1-1]:CARR:SET:CEN
T #
:SENSe:SP[1-1]:CARRier:FBAN
d
:SENS:SP[1-1]:FREQ:CENT
:SENS:SP[1-1]:FREQ:SPAN
:SENS:SP[1-1]:FREQ:STAR
:SENS:SP[1-1]:FREQ:STOP
:HCOP:ABOR
:SYST:BACK:STAT
:MMEM:STOR:IMAG
:MMEM:LOAD:CORR:POW
:MMEM:LOAD:CORR:POW
:SENS:CORR:POW:STAT
7