Agilent Technologies E5052A Programmer's Manual page 470

Manual Changes
Manual Changes
Change 1
The functions listed below are limited when option 011 is installed.
Table A-3 Limited functions when option 011 is installed
Functions
[PN] Start frequency
[PN] Correlation
[PN] IF Gain
[FP] Trigger Mode
The SCPI commands that related the limited functions above have also the limitations on
the initial values and the range of parameters.
470
Limitations
Minimum value is 10 Hz
Not Available (The value is fixed as 1)
Not Available (The value is fixed as 10 dB)
Tester mode only
Appendix A