Piping Parts For System 2 - YOKOGAWA EXAxtZR Instruction Manual

4.2.1

Piping Parts for System 2

Detector
General-use
detector
High-temperature
Detector
Note: Parts with marking * are used when required.
General parts can be found on the open market.
IM 11M12A01-02E
Check that the parts listed in Table 4.2 are ready.
Table 4.2
Piping location
Calibration gas inlet
Reference gas inlet
Calibration gas inlet
Reference gas inlet
Sample gas outlet
Parts
Stop valve or check valve
Nipple *
Zero gas cylinder
Gas pressure regulator
Joint for tube connection
Air set
Joint for tube connection
Stop valve or check valve
Nipple *
Zero gas cylinder
Gas pressure regulator
Joint for tube connection
Air set
Joint for tube connection
Auxiliary ejector *
T-shaped joint of the same
diameter *
Needle valve *
Reducing nipple *
Note
Recomended by YOKOGAWA (L9852CB or
G7016XH) Provided by YOKOGAWA
(K9292DN or K9292DS)
Rc1/4 or 1/4 NPT
User«s scope
Recommended by YOKOGAWA (G7013XF or
G7014XF)
Rc1/4 or 1/4 NPT
Recommended by YOKOGAWA (G7011XF or
E7040EL)
Rc1/4 or 1/4 NPT
Recommended by YOKOGAWA (L9852CB or
G7016XH) Provided by YOKOGAWA
(K9292DN or K9292DS)
Rc1/4 or 1/4 NPT
User«s scope
Recommended by YOKOGAWA (G7013XF or
G7014XF)
Rc1/8 or 1/8 NPT
Recommended by YOKOGAWA (G7011XF or
E7040EL)
Rc1/4 or 1/4 NPT
Recommended by YOKOGAWA (E7046EC or
E7046EN)
R1/4 or 1/4 NPT
Rc1/4 or 1/4 NPT
R1/2 to R1/4 or R1/2 to 1/4
NPT
4. Piping
general parts
general parts
general parts
general parts
general parts
general parts
general parts
general parts
T4.2E.EPS
4-7