Zo21P-H Adapter For High-Temperature Probe - YOKOGAWA EXAxtZR Instruction Manual

2.3.2

ZO21P-H Adapter for High-Temperature Probe

2-10
The probe adapter is used to lower the sample gas to a temperature below 700 C (below
300 C at probe adapter surface) before it is fed to the detector.
Insertion length: 1 m, 1.5 m
Material in Contact with Gas: SUS 316 (JIS), Zirconia, SiC or SUS 310S, SUS
304 (JIS) (flange)
Probe Material: SiC, SUS 310S (JIS)
Installation: Flange mounting (FF type or RF type)
Probe Mounting Angle: Vertically downward within
Where the probe material is SUS 310S, horizontal mounting is available.
Construction: Non explosion-proof. Rainproof construction
Weight: Insertion length of 1.0 m: approx. 6.5 kg (JIS) / approx. 8.5 kg (ANSI)
Insertion length of 1.5 m: approx. 7.5 kg (JIS) / approx. 9.5 kg (ANSI)
Sample gas temperature: 0 to 1400 C (when using SiC probe) 0 to 800 C (when
using SUS 310S probe adapter)
Sample gas pressure: -0.5 to + 5 kPa. When using in the range of 0 to 25 vol% O
more, the sample gas pressure should be in the range of -0.5 to +0.5 kPa.
(Where the sample gas pressure for the high-temperature probe is negative, an
auxiliary ejector is necessary.)
Option
Model Suffix code
.......................................
ZO21P -H
.....................................
-A
Material .....................................
-B
...............................
-100
Insertion
...............................
Iength -150
Flange .............................
-J
............................
-N
............................
-M
............................
-L
............................
-A
............................
-R
............................
-Q
............................
-T
............................
-S
............................
-E
......................
Style code
*A
Description
code
High Temperature Probe Adapter
SiC
SUS 310S
1.0 m
1.5 m
JIS 5K-50-FF equivalent
JIS 10K-65-FF equivalent
JIS 10K-80-FF equivalent
JIS 10K-100-FF equivalent
ANSI CLASS150-4RF equivalent
ANSI CLASS150-2 1/2-RF equivalent
ANSI CLASS150-3-RF equivalent
JPI CLASS150-3-RF equivalent
JPI CLASS150-4-RF equivalent
DIN PN10-DN50-A equivalent
Style A
5
T2.3E.EPS
IM 11M12A01-02E
or
2