Other Equipment; Dust Filter For The Detector (Part No.: K9471Ua) - YOKOGAWA EXAxtZR Instruction Manual

2.7 Other Equipment

2.7.1

Dust Filter for the Detector (Part No.: K9471UA)

2-24
This filter is used to protect the detector sensor from a corrosive dust component or from
a high concentration of dust when the oxygen concentration in utility boilers or concrete
kilns are to be measured.
This filter requires a measurement gas flow of 1m/sec or faster, for circulation of the gas
in the sensing part.
• Standard specification
Applicable detector: Standard-type detector for general-use (the measurement gas
flow should be approximately perpendicular to the probe.)
Mesh: 30 microns
Material: Sic (Filter), SUS316 (JIS)
Weight: Approx. 0.2 kg
Part No.
K9471UA
K9471UX
SiC Caborundum filter
Description
Filter
Tool
T2.7E.EPS
Unit : mm
32
10
Incresing of insertion length
IM 11M12A01-02E
F2.8E.EPS