Default Values - YOKOGAWA EXAxtZR Instruction Manual

8.4.3

Default Values

IM 11M12A01-02E
When the analyzer is delivered, or if data are initialized, alarm and other setting defaults
are as shown in Table 8.6.
Table 8.6 Output Contact Default Settings
Item
High-high-
limit alarm
High-limit
Alarm
alarm
settings
Low-limit
alarm
Low-low-
limit alarm
Error
Warm-up
Output range
change
Calibration
Maintenance
Blow-back
Other
High-limit
settings
temperature
alarm
Calibration-
gas press. low
Process
upset
Operating
contact
status
: Present
Note: Blank boxes in the above table indicate that the default is disabled .
Output Output Output
contact 1 contact 2 contact 3 contact 4
Open Closed Closed
(default) (default) (default)
8. Detailed Data Setting
Output
Closed
(fixed)
T8.6E.EPS
8-13