Display Configuration (For Oxygen Analyzer) - YOKOGAWA EXAxtZR Instruction Manual

7.4.2

Display Configuration (for Oxygen Analyzer)

[Detailed-data display]
Calibration execution
Returns to the
Execution/Setup
display.
7-4
Figure 7.3.1 shows the configuration. A password the displays positioned below enables
display Execution/Setup to be protected. If a password has not been set, press the [Enter]
key to proceed to the next panel display. The Home key enables you to return to
Execution/Setup from any panel display.
[Basic panel display]
[Execution/Setup display]
[Password Entry display]
Blow-back execution
Returns to the
Execution/Setup
display.
Figure 7.3.1 Display Configuration
Reset panel display
Returns to the
Execution/Setup
display.
[Trend Graph display]
Maintenance panel
display
Display setup
Display item
Trend graph
Auto return time
Language
Calibration setup
Mode
Points
Zero- and Span-gas
conc.
Timing
Blow-back setup
mA-output loop check
Contact check
Returns to the
Execution/Setup
display.
Commissioning
(Setup) display
mA-output setup
mA-output1
mA-output2
Set presets
Alarms setup
Hysteresis
Contact delay
Setpoints
Contact setup
Input contacts
Output contacts
Others
Clock
Averaging
Fuel setup
Passwords
Defaults
Returns to the
Execution/Setup
display.
F7.3.1E.EPS
IM 11M12A01-02E