Touchpanel Switch Operations; Basic Panel And Switch - YOKOGAWA EXAxtZR Instruction Manual

7.4 Touchpanel Switch Operations

7.4.1

Basic Panel and Switch

Tag name display area
Primary value
Secondary value
Tertiary value
IM 11M12A01-02E
The converter uses a touchpanel switch which can be operated by just touching the panel
display. Figure 7.3 shows the basic panel display. The switches that appear in the switch
display area vary depending on the panel display, allowing all switch operations. Table
7.1 shows the switch functions.
Tag:
21.0
17.43mA -Output1
17.43mA -Output2
Figure 7.3 Basic Panel Display
Tag name display area: Displays the set tag name (Refer to Section 10.1.4, "Entering
Tag Name").
Primary to tertiary display items: Displays the selected item. (Refer to Section 7.9,
"Setting Display Item".)
Switch display area: Displays switches and functions selected according to the panel
display.
Alarm and error display area: Displays an error if an alarm or error occurs. If you touch
this area, the details of the error or alarm are then displayed.
Table 7.1 Switches and Their Functions
Home key:
Returns to the Execution/Setup display.
Reject key:
Moves back to the previous display.
Cursor key:
Moves the cursor down.
Graph display key:
Displays a trend graph.
Alarm:
Displayed if an alarm arises.
% O
2
Enter key:
Enters the input value and sets up the
selected item.
Enter
Setup key:
Used to enter the Execution/Setup display.
Detailed-data key:
Displays the analog input value.
Cursor:
Points the cursor at the currently
selected item.
Error:
Displayed if an error occurs.
7. Startup
Switch display area
Alarm and error
display area
F7.3E.EPS
T7.1E.EPS
7-3