6.
Components
6.1 ZR22G Detector
6.1.1
General-purpose Detector (except for Model ZR22G-015)
Pipe support
Bolt
IM 11M12A01-02E
In this Chapter, the names and functions of components are described for the major
equipment of the EXAxt ZR Separate-type Zirconia Oxygen Analyzer.
Probe
this part is inserted in the furnace.
Select length from 0.4,
0.7, 1.0, 1.5, 2.0, 2.5 or 3.0
3.6, 4.2, 4.8 or 5.4 m.
U-shaped pipe
Filter
Washer (or plain washer)
Figure 6.1 General-use Detector (standard type)
Terminal box,
NEMA 4X/IP66 equivalent
(recirculation to furnace with pressure compensation only)
Calibration gas
pipe opening
Contact
Metal O-ring
Sensor (cell)
Flange used to mount the detector.
Select from JIS or ANSI
standard models.
Dust filter mounting screw
Screw
6. Components
Probe
F6.1E.EPS
6-1