Switching The Beeper Off - Samsung MC32K7056 Series User Manual

Oven use
3
4
5
106 English
MC32K7056CB_TL_DE68-04545A-00_EN.indd 106
3. Select the appropriate power level by
turning the Multi Function Selector Dial
until the corresponding output power is
displayed (600, 450, 300, 180, 100 W).
At that time, press the Multi Function
Selector Dial to set the power level.
• If don't set the power level within
5 seconds, Automatically changes to the
cooking time setting stage.
(Default : 600 W)
Result: The following indications are
displayed:
(Microwave & Hot
blast combi mode)
180 °C (Temperature)
4. Select the appropriate temperature by
turning the Multi Function Selector Dial
(Temperature : 200-40 °C).
At that time, press the Multi Function
Selector Dial to set the power level.
• If don't set the temperature within
5 seconds, Automatically changes to the
cooking time setting stage.
(Default : 180 °C)
5. Set the cooking time by turning the Multi
Function Selector Dial.
• The maximum cooking time is
60 minutes.
6. Press the START/+30s button.
6

Switching the beeper off

You can switch the beeper off whenever you want.
1. Press the START/+30s and STOP/ECO
1
2
2. To switch the beeper back on, press the
Result: Combination cooking starts. The
oven is heated to the required
temperature and then microwave
cooking continues until the
cooking time is over. When it has
finished.
1) The oven beeps 4 times.
2) The end reminder signal will beep
3 times (once every minute).
3) The current time is displayed again.
button at the same time.
Result: The oven does not beep to
indicate the end of a function.
• The following indications are displayed.
START/+30s and STOP/ECO button again
at the same time.
Result: The oven operates normally.
• The following indications are displayed.
2018-04-18 12:26:09