INTERFACE MANUAL
To connect the EXT-I/O cable, use the attached connectors.
As shown in Fig. 7.5, when the cable insert/release button of the connector is
pressed in by a flat-head screwdriver, the cable insert/release button is locked, and
the cable can be attached or detached. After the cable is firmly pressed in, pull up
the cable insert/release button to release the lock. (Lightly pull the cable and make
sure that the cable is connected completely and will not come off. DO NOT pull the
cable by force, however. If an unusually large force is exerted on the cable, the
cable may be damaged.)
To detach a cable, use a screwdriver to press in the cable insert/release button so
that the cable insert/release button is locked, and then pull out the cable.
STE 80729
– 98 –