When Type P is selected (when X8GI printed board is used)
(1)
Transistor output
P24V
?
P24G
[ Source type (" +" common) ]
•
Transistor specification
Rated voltage: 24 VDC
Rated current: 100 mA max.
•
Relay contact specification
Maximum rating: 125 VAC, 0.5 A / 60 VDC, 1.0 A
!
CAUTION
(2) Relay contact output
User side
* The above figure exemplifies a
normal open contact output
structure.
The servo ON contact output is
of a normal open contact type
and the emergency stop contact
output is of a normal close contact
type. Take utmost care when using.
Type P
If the current which exceeds the rated output current is
supplied, the output device may be damaged or the
printed board may be burnt. To avoid this, be sure to
use within the rated output current.
– 67 –
INTERFACE MANUAL
User side
External
power
supply
STE 80729