is the number of SAP packets received containing SAP
SAP Worse Rt Rcv
updates that are less efficient (worse) than the information in
the server information table.
is the number of SAP General Queries received with an
SAP Ukn G_Query
invalid packet size. These packets will be discarded.
is the number of SAP Nearest Queries received with an invalid
SAP Ukn N_Query
packet size. These packets will be discarded.
is the number of SAP General Responses received with an
SAP Ukn G_Resp
invalid packet size. These packets will be discarded.
is the number of SAP Nearest Responses received with an
SAP Ukn N_Resp
invalid packet size. These packets will be discarded.
is the number of NetBIOS packets received on the interface.
NetB Pkts Rcv
is the number of NetBIOS packets transmitted on the
NetB Pkts Tx
interface.
is the number of NetBIOS packets received on the interface
NetB Ukn Pkts Rcv
with an invalid size.
is the number of NetWare "Lite" packets received on the
Lite Pkts Rcv
interface.
is the number of NetWare Lite packets transmitted on the
Lite Pkts Tx
interface.
is the number of "watchdog," or "keep-alive," requests
WD Req Pkts Rcv
received from other servers. These are issued periodically to
all clients, to determine whether each client is still available.
is the number of received responses to keep-alive messages
WD Resp Pkts Rcv
issued by the local server.
is the number of NetWare file server serialization security
Serial Pkts Rcv
frames received. These broadcast frames are used by Novell to
hold information regarding the licensing of the file server
executables.
is the total number of RIP and SAP packets transmitted on the
Pkts Tx
local interface.
is the total number of successfully transmitted RIP and SAP
Tx Completions
packets that originated at the local node.
is the total number of RIP and SAP packets received on the
Pkts Rcv
local interface.
is the number of packets denied transmission because of a
Tx Pkts Filtered
filter configured on the interface.
Need help?
Do you have a question about the Netlink FRX8000 and is the answer not in the manual?