Logical Trunk Port Parameters If Physical Port Is X.25 - Cabletron Systems Netlink FRX8000 Installation And Setup Manual

Table 1-5 Logical Trunk Port Parameters if Physical Port is Frame Relay
Parameter
Maximum Frame Size (in bytes)
2
DLCI
Frame Relay Management
This parameter is found in the database record for the physical frame relay port.
1
This parameter is the
2
This parameter is
3
= none, = LMI,
0 1
Table 1-6 Logical Trunk Port Parameters if Physical Port is X.25
Parameter
Lowest Two-way Channel
Highest Two-way Channel
Flow Control Negotiation
Throughput Class Negotiation
Maximum Packet Size (bytes)
Default Max Packet Size
Maximum Window Size
Default Window Size
Maximum Throughput Class
Restart Timer (seconds)
Incoming Call Timer (seconds)
Reset Timer (seconds)
Clear Tim er (seconds)
Logical Trunk Calling Address
Logical Trunk Called Address
PVC
PVC LCN
See Table 2-1
1
If is , leave
PVC Y
2
This parameter is not yet implemented – enter any value.
3
Overview
1
3
Mapped DLCI Number
in the database record for the physical frame relay port.
Link Management
= Annex D.
2
(on page 2-12).
Logical Trunk Calling/Called Address
Valid Values Your Value
128–4096
16–991
3
0–2
in the database record for the logical port.
Valid Values Your Value
10–4095
10–4095
Y/N
Y/N
128–4096
16–Max Size
1–7
1–Max Size
3–14 *
1–600
1–600
1–600
1-600
1
1–15 digits
2
1–15 digits
2
Y/N
3
see note see note
blank.
3
1- 9