Table of Contents
Advertisement
10. When the following is displayed (after a few seconds):
SCO System V/386
Boot
:
press [Enter].
11. When prompted:
Type Control-D to proceed with normal startup
(or give root password for system maintenance)
press (simultaneously)
12. The current system date and time will be displayed. Press
displayed values, or enter the correct values, in the format:
where:
= year (
YY
= hour (
hh
If you only need to change the time, enter the hour and minute; to change the
year, month, or day, you must enter the entire string.
13. Various messages will be displayed, ending with:
database (y/n)?
For the remainder of this procedure, the words "and press" will be
omitted if you are asked to type information and press
example, "type
14.
scosysv!login:
15. When asked for a password, type
16. At the
[NETLINK]
Menu.
17. Type
8 [Enter]
18. When prompted, insert the first/only archived diskette into the drive and press
. The database will be copied from the diskette, overwriting the
[Enter]
database in the new INM. If the archived database is on more than one disk,
insert each one, in order (when prompted), and press
no more diskettes to restore, remove the current one from the drive and press
. You will be returned to the NMP Utilities Menu.
[Enter]
19. The node number will be the node at which the database was archived, so you
must now change it to the number of the new node. Type
prompted, type the new number (
20. Type
9 [Enter]
21. Type logout
Installing a Node
.
[Ctrl] [D]
to
)
= month (
00
99
MM
to
)
= minute (
00
23
mm
Type
and press
y
and press
y
will be displayed. Type
prompt, type
util [Enter]
(
).
Restore Database
to exit to the
[NETLINK]
.
[Enter]
to
)
= day (
01
12
DD
to
)
00
59
Check protected subsystem
.
[Enter]
" will be written "type
[Enter]
.
netlink [Enter]
.
mypass [Enter]
. This will display an NMP Utilities
[Enter]
) and press
1–250
[Enter]
prompt.
to accept the
[Enter]
,
YYMMDDhhmm
to
)
01
31
. For
[Enter]
."
y [Enter]
. If/when there are
and, when
1 [Enter]
.
2- 35
Advertisement
Table of Contents
Need help?
Do you have a question about the Netlink FRX8000 and is the answer not in the manual?