Cabletron Systems Netlink FRX8000 Installation And Setup Manual page 80

Enterasys netlink frx8000 interface module: install guide
Hide thumbs Also See for Netlink FRX8000:
Table of Contents

Advertisement

In Echo Reply
Out/In Dest Unrech
Out/In Pkt Lost
Out/In Redirect
Out Echo
In Echo
Out/In Time Exceed
Out/In Bad IP Hdr
Out Time Req
In Time Req
Out Time Rsp
3-20
is the number of incoming ICMP echo responses, sent by other
entities in the IP network in response to echo requests
(see "
") from this node.
Out Echo
is the number of outgoing datagrams that could not be delivered
because the destination device/network was not reachable, a
necessary protocol was not running, or fragmentation was
necessary but disallowed (due to the "don't frag" flag being set).
The message text says
the datagram, and
Incoming
is the number of datagrams transmitted by this node that
subsequently were lost. The message text says
is a point in the path of the datagram, and
originated at this node.
is the number of datagrams transmitted by this node that
subsequently were redirected within the same network. The
message text says
Outgoing
datagram, and
Incoming
is the number of requests to other entities in the IP network to
respond, as a means of confirming that communication is possible.
is the number of requests from other entities in the IP network to
respond to those entities, as a means of confirming that commu-
nication is possible.
is the number of transmitted datagrams that subsequently were
discarded by a router due to expiration of the datagram's "time to
live," or by a destination host due to inability to reassemble the
datagram within the necessary time period. The message text says
if this node is a point in the path of the datagram, and
Outgoing
if the datagram originated at this node.
Incoming
is the number of transmitted datagrams that subsequently were
discarded due to a header size less than was specified. The message
text says
if this node is a point in the path of the datagram,
Outgoing
and
if the datagram originated at this node.
Incoming
is the number of requests to other entities in the IP path for
timestamps, which are a method of determining delay charac-
teristics over the Internet.
is the number of requests received from other entities in the IP path
for timestamps, which are a method of determining delay charac-
teristics over the Internet.
is the number of responses to timestamp requests that were made to
this node by other entities in the IP path.
if this node is a point in the path of
Outgoing
if the datagram originated at this node.
Incoming
if this node is a point in the path of the
if the datagram originated at this node.
FRX8000 Installation & Setup Guide
if this node
Outgoing
if the datagram

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Netlink FRX8000 and is the answer not in the manual?

Table of Contents