Local Inm Configuration Menu - Cabletron Systems Netlink FRX8000 Installation And Setup Manual

8. When asked for a password, type
If installing a new INM into an existing network, go step 9.
If installing the first INM in a new network, go to step 32.
9. At the
[NETLINK]
10. At the next
11. You will be warned:
12. When asked:
played.
In tegrated N etw ork Manager Con figu ration
MAIN MEN U
A Port Con figu ration
R R etu rn
Select:
Figure 2-19 Local INM Configuration Menu
13. Press and, when prompted, enter the requested information by typing the
[A]
appropriate number and pressing
Node ID:
LP ID (the LP containing the trunk port):
14. A menu similar to the following will be displayed.
2-28
prompt, type
icpini [Enter]
prompt, type
[NETLINK]
Current database will be purged. Continue?
, type
Is this a 5.0 node?
[Enter]
.
1–250
. Then:
mypass [Enter]
.
.
uconsol [Enter]
. The following menu will be dis-
n [Enter]
:
.
0–7
FRX8000 Installation & Setup Guide
Type .
y [Enter]